iiNet BizPhone ‘Standard’ T43U Quick Startup Guide
IP PHONE T43U
Quick Startup Guide
The following contents are included in your T43U package:
1. Attach the stand, as shown below.
2. Connect the handset and optional headset, as shown below.
Note: Headsets are to be purchased separately.
3. Connect the USB flash drive (if required), as shown below.
Note: The USB ports can also be used to connect other
USB devices, such as EXP43, USB headset and so on. We
recommend you connect Bluetooth USB dongle or Wi-Fi
USB dongle (purchased separately) to the upper USB
port, and connect EXP43 (purchased separately) to the
lower USB port.
4. Connect the network and power, as shown below.
Note: You have two Power Options – AC or PoE. If PoE is
provided, you do not need to connect to the Power Adapter.
After the IP Phone is connected
to the network and supplied with
power, it automatically begins
the initialisation process.
After startup, the phone is ready
to use (pre-configured).
To Next Page
Need help?
General
