Yealink T58 How To Configure

How to Configure Yealink T58:
To begin configuring your Yealink for use on Intermedia’s network, you will need to pull up the graphical
user interface. To locate the IP address from the phone screen, use the following steps:
1) Swipe down from the top of the phone screen
2) Tap on the “Settings” icon.
3) The first section of options will be “Status”, tap on the Network option.
4) Line 1 will read “IPv4 Status,” tap on this. The phone’s IP address is on the next screen.
You will then be presented with a screen that looks like this:
You will now need to navigate to the Account Page. You will need to enter in the SIP configuration
information for your AnyPhone device on this page. These credentials can be found in your Hostpilot
Account. The User Name and Server address will be whatever is found in your SIP Configuration for this
device.

Yealink T58 Specifications

General

Display	7-inch color touchscreen
Audio Features	HD Voice, Hearing Aid Compatible (HAC) handset, Acoustic Shield Technology
Connectivity	Dual-port Gigabit Ethernet, Wi-Fi (optional), Bluetooth (optional)
Expansion Module	Supports up to 2 EXP50 expansion modules
USB Ports	2 USB ports
Power	PoE (802.3af)
Wi-Fi	Optional (802.11a/b/g/n)
Audio Codecs	Opus, G.722, G.711, G.729, G.726, iLBC
Supported Protocols	SIP
Ethernet Ports	Dual-port Gigabit Ethernet
Weight	1.4 kg
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	10% to 90% (non-condensing)