Configuring Call Preferences
161
2. Select the desired value from the pull-down list of Call Match.
3. Click Confirm to accept the change.
To configure call match via the remote control:
1. Select Menu->Call Features.
2. Check the Call Match checkbox.
3. Press the Save soft key to accept the change.
History Record
The endpoint maintains a local call history, which contains call information such as remote party
identification, time and date, and call duration. Users can manage call history list via the remote
control, web user interface and video conferencing phone. To save call history, you must enable
the history record feature on the endpoint in advance. If history record feature is disabled, the
endpoint will not save call log and prompt the missed call.
The history record parameter on the endpoint is described below:
Enables or disables the history
record feature on the endpoint.
Default: Enabled
Remote Control
Web User Interface
To configure history record via web user interface:
1. Click on Setting->Call Features.