Yealink
®
(W56H,(W70B
Quick User Guide
For use with Yealink® UC Software
W70B-146.85.0.40.rom or later and the W56H
Handset and the W70B Base.
Handset Layout
1: Receiver
2: Power LED Indicator
3: LCD Screen
4: Soft Keys
5: Message Key
6: Speakerphone Key
7: Navigation Keys
8: OK Key
9: On Hook/Power Key
10: Off Hook Key
11: Keypad
12: Transfer Key
13: Mute Key
14: Microphone
15: Speaker
16: 3.5mm Headset Jack
Handset Registration
You can register up to 8 handsets to one W70B base
station.
When the handset LCD screen prompts
“Unregistered!”, long press on the base
station till the registration LED flashes. There are two
methods to register a new handset.
Easy Registration:
• Press the Reg soft key on the handset to register
quickly.
Normal Registration:
•
Press the OK soft key on the handset, and
then select Register Handset.
•
Select the desired base station and then press
the OK soft key. The handset begins
searching the base station.
•
Press the OK soft key after searching a base
station successfully.
•
Enter the base station PIN (default: 0000), and
then press the Done soft key to
complete registration.
Basic Operations
Turning Handset On
•
Press button until phone lights up.
•
Place phone in charging cradle and phone will
turn on.
Turning Handset Off
•
Long press key until phone turns off.
Volume Adjustment
•
Press left and right arrow keys on the
directional pad when phone is idle to adjust
ring volume.
•
Press left and right arrow keys on the
directional pad when phone is in a call to
adjust call volume.
To Next Page
Need help?
General
Weight and Dimensions
