Yeti ASR User Manual

ASR | OWNER’S MANUAL
12
CABLE ROUTING SET-UP
01
With a 3mm allen wrench, remove the lower
access door.
01
Remove rubber port grommet from frame.
02
Install your seatpost housing into the drive-side
head tube port, pushing until it exits near the
downtube cable port access hole.
02
Route cable housing through the frame and out
of the top port in the headtube on drive side.
DROPPER POST ROUTING SET-UP
CABLE LOCKOUT ROUTING SET-UP
04
While pushing the housing into the head tube
port, continue guiding the cable up the seat
tube through the access hole until the housing
exits the seat tube.
03
The hole under the downtube protector
provides an access point to use your nger to
help push the housing around the bend in the
frame up into the seat tube.
01
02

Yeti ASR Specifications

General

Brand	Yeti
Model	ASR
Category	Bicycle Accessories
Language	English