FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
TECHNICAL GUIDE
MODELS: P*HM, P*DH, P*LB
OIL-FIRED WARM AIR
UPFLOW / HORIZONTAL,
DOWNFLOW / HORIZONTAL AND
LOWBOY FURNACES
80 AFUE
NATURAL GAS
58 - 188 MBH OUTPUT
EFFICIENCY
RATING
CERTIFIED
Heating Air Conditioning
R
036-21475-003 Rev. A (0605)
DESCRIPTION
This is a high end product line for those in the dedicated oil
business or HVAC contractor who demands the best in an oil
furnace. These oil-fired furnaces are decorator-styled warm
air heating units designed for installation in basements, clos-
ets, recreation rooms or garages. The complete line consists
of three types of furnaces with 9 available models. Heating
capacities range from 58 through 188 MBH bonnet output.
All models are designed to accommodate add-on air condi-
tioning. The capacities, cfm's and performance are matched
to meet year-round comfort requirements. After the installa-
tion of an oil-fired furnace, the air conditioner may be added
at any time by adding a compact cooling coil to the furnace,
and a small quiet condensing section outside the home.
WARRANTY
Lifetime limited warranty on heat exchangers to original
owner
10-year limited warranty on heat exchanger when used on
commercial applications
1-year limited warranty on all other parts
FEATURES
• Proven circular heat exchanger - 16 gauge all welded
construction on P*HMX and P*LBX
(except P4LBX20F19001)
• Hard cast ceramic combustion chamber for proper flame
control and long reliability
• Industry standard Beckett “AF” series flame retention
head burner
• Industry standard controls and components used
throughout the furnace for easy service and parts avail-
ability
• All models are equipped with fan relay for easy add-on
air conditioning (except P4LBX20F19001-heating only)
• All units are approved for multiple firing rates for easy
application
• Heavy 20 gauge cabinet for strength and quiet operation
• Quiet four speed direct drive blower motors on most
models
To Next Page
Need help?
General
