York Solution User Manual

YORK INTERNATIONAL
4
FORM 102.20-FA1 (1104)
Table 1 - Fasteners for Solution Units (Continued)
PART
NUMBER
DESCRIPTION WHERE USED
021-19582-000 SCR, PAN HD PHLPS, MACH, #10-32 X 1/2 LG, STL ZINC PLTD, WITH
CAPTIVE INTERNAL TOOTH WASHER
Mounting Kit, 500VA / 150VA Control
Transformer & Mounting Kit, Small
MCC Panel
021-19580-000 NUT, RIVET KNURLED, 3/8-16, STL ZINC PLTD Mounting Kit, Large MCC Panel
021-19579-000 NUT, RIVET KNURLED, #10-31, STL ZINC PLTD Mounting Kit, Small MCC Panel
021-19585-000 SCREW, 1/4”-14 X 1”, PHILLIPS PAN HD., SELF DRILLER W/WASHER, ZINC
W/EPDM .25
Outdoor Unit Roof
021-17711-000 RIVET, POP, 1/8”x1/4” GRIP Panel outer to liner
021-17722-000 SCR, TAP TY A PH 14-10 1/4 X3/4 PAN HEAD, PHILLIPS (#1), TYPE A, ZINC
PLATED
Primary screw for inside sheet
metal, panels outside unit , damper
mounting, Shipping tie down to
raceway
021-01154-000 WASH, LK TH INT 5/16 HVY,ZINC PLTD., STD. C-76 RF Filter Tracks
021-02523-000 NUT, HEX 5/16 - 18 UNC - 2B STL ZINC PLTD RF Filter Tracks
021-08394-000 SCR, HEX CAP 5/16-18 X 3/4 LG STL ZINC PLTD RF Filter Tracks
021-09983-000 WASH, FLT 3/8 ID X 7/8 OD 0.083 THK STL ZINC PLATED,ANSI B27.2, STD C-
48
RF Filter Tracks
021-19587-000 RIVET, POP, 3/16”x3/8” GRIP, STL ZINC PLTD RF Front or Rear Load Filter Tracks
021-08395-000 SCR, CAP HEX 3/8 - 16 UNC - 2A X 0.75, STL ZINC PLTD SECURES BLOCK TO MOTOR
BASE
021-19560-000 SCR,1/4-14x1,PHIL PAN SELF DRILL Self drill Screw for various locations
when required
021-01267-000 WASH FLT 7/16 ID X 1 OD X 0.083 THK STL ZINC PLTD. Snubber
021-19559-000 SCR, CAP HEX 3/8 - 16 UNC - 2A X 5.0, STL ZINC PLATED Snubber
021-00331-000 BOLT, LAG HEX 3/8 X2-1/2 ZINC PLATED Tie down plate to shipping skid/wood
021-19567-000 PLUG, STEEL FINISHING TO FIT 3/4” ID HOLE Top Corner Connector foam hole
plug

York Solution Specifications

General

Brand	York
Model	Solution
Category	Air Handlers
Language	English