FOREWARD
This manual provides spares replacement and service information for the 402, 2443, 2842, 2844,
3824, and 3844 series printers, manufactured by Zebra Technologies Corporation, Camarillo,
California.
TECHNICAL SUPPORT
If for any reason you require product technical support, please contact the Distributor where you first
purchased your equipment. If they cannot help you or at their direction, contact Zebra Repair
Administration.
RETURN MATERIALS AUTHORIZATION
Before returning any equipment to Zebra for in warranty or out of warranty repair, contact Repair
Administration for a Return Materials Authorization (RMA) number. Repack the equipment in the
original packing material and mark the RMA number clearly on the outside. Ship the equipment,
freight prepaid, to the address listed below:
Zebra RMA, USA
1001 Flynn Road
Camarillo, CA. 93012
Phone: +1 (805) 579-1800
repair@zebra.com
Label Printers: Card Printers:
Zebra International, Europe Zebra International, Europe
Zebra House, The Valley Centre Zone Indutrielle, Rue d'Amsterdam
Gordon Road, High Wycombe 44370 Varades, France
Buckinghamshire HP13 6EQ, United Kingdom Phone: +33 (0) 240 097 070
Phone: +44 (0) 1494 472872 FAX: +33 (0) 240 834 745
FAX: +44 (0) 1494 450103
COPYRIGHT NOTICE
This document contains information proprietary to Zebra Technologies Corporation. This document
and the information contained within is copyrighted by Zebra Technologies Corporation and may
not be duplicated in full or in part by any person without written approval from Zebra. While every
effort has been made to keep the information contained within current and accurate as of the date of
publication, no guarantee is given or implied that the document is error-free or that it is accurate
with regard to any specification. Zebra reserves the right to make changes, for the purpose of
product improvement, at any time.
980358-001 Rev. B iii
To Next Page
Loading...
Need help?
General
