ET5X 4-SLOT CHARGE ONLY CRADLE
INSTALLATION GUIDE
Parts
Insert Installation
Install inserts into slots for ET5X tablets without Rugged Frame.
Guide Installation
The cradle comes with four 8” tablets guide and four 10” tablet
guides. Install the appropriate guides for the tablets.
1. Align the two tabs on the guide with the two slots in the
cradle.
2. Place the guide down onto the cradle and then rotate the
guide until it snaps into the cradle.
Inserts (4)8” Tablet Guides (4)
10” Tablet Guides (4)
Cradle
To Next Page
Need help?
General
