Need help?Do you have a question about the Zebra GT800 Series and is the answer not in the manual?
General| Print Method | Thermal Transfer and Direct Thermal |
|---|---|
| Media Sensors | Reflective and transmissive |
| Power Requirements | 100-240 VAC, 50-60 Hz |
| Humidity | 10% to 90% non-condensing |
| Resolution | 203 dpi |
| Max Print Width | 4.09 inches/104 mm |
| Max Print Speed | 5 inches/127 mm per second |
| Max Print Length | 39 inches/991 mm |
| Memory | 8 MB SDRAM |
| Media Width | 0.75 inches/19.5 mm to 4.49 inches/114 mm |
| Media Length | 0.25 inches/6.5 mm to 39 inches/991 mm |
| Media Thickness | 0.003 inches/0.08 mm to 0.0075 inches/0.20 mm |
| Media Roll Diameter | 5 inches/127 mm |
| Ribbon Length | 244 feet/74 m |
| Ribbon Core | 0.5 inches/12.7 mm |
| Connectivity | USB, Serial, Parallel |
| Programming Languages | ZPL, ZPL II |
| Operating Temperature | 40° F/5° C to 105° F/41° C |
| Storage Temperature | -40° F/-40° C to 140° F/60° C |
| Ribbon Width | 1.33 in./33.8 mm to 4.3 in./110 mm |
To Next Page
