Warranty Information
ZebraNet™ PrintServer II
Zebra Technologies Corporation warrants the ZebraNet PrintServer II against defects in
material or workmanship for a period of three years from either (i) the date of shipment to
you by Zebra Technologies Corporation, or (ii) the date of any resale by you to an end user,
whichever is later. Proof of shipment date may be required to validate the warranty period.
This warranty does not cover normal wear and tear, and shall be null and void if the
equipment is modified, improperly installed or used, damaged by accident or neglect, or
improperly installed or replaced by the user. To qualify for this warranty, the ZebraNet
PrintServer II must be returned to the factory or other authorized service center.
ZEBRA TECHNOLOGIES CORPORATION’S SOLE OBLIGATION UNDER THIS
WARRANTY SHALL BE TO FURNISH PARTS AND LABOR FOR THE REPAIR OR
REPLACEMENT OF PRODUCTS FOUND TO BE DEFECTIVE IN MATERIAL OR
WORKMANSHIP DURING THE WARRANTY PERIOD, OR ZEBRA MAY, AT ITS
DISCRETION, ISSUE A CREDIT FOR ANY SUCH DEFECTIVE PRODUCTS IN SUCH
AMOUNT AS IT DEEMS REASONABLE.
As a condition of this warranty, the user must: (a) obtain a Zebra Return Materials
Authorization (RMA) which will include an RMA number that must be prominently
displayed on the outside of the shipping container (returns without an RMA number will be
rejected by Zebra and immediately returned to you, freight collect); (b) ship the Product
being returned freight prepaid, to the authorized service location; and (c) include with the
Product a written description of the claimed defect. Products returned should be packaged in
the original packing and shipping container or comparable container. In the event the Product
is not so packaged or if shipping damage is evident, it will not be accepted for service under
warranty. Surface transportation charges for the return of the Product to the customer shall be
paid by Zebra Technologies Corporation within the 48 contiguous states and the District of
Columbia. The customer shall pay shipping costs, customs clearance, and other related
charges outside the designated area. If Zebra Technologies Corporation determines that the
Product returned to it for warranty service or replacement is not defective as herein defined,
the customer shall pay all costs of handling and transportation.
Warranty Exclusions and Conditions
The above warranty is in lieu of all other warranties, expressed or implied, oral or written,
statutory or otherwise, including any implied warranty of merchantability or fitness for a
particular purpose. Zebra Technologies Corporation shall not be responsible for the specific
application to which any Products are applied, including but not limited to compatibility with
other equipment. All statements, technical information and recommendations relating to
Zebra Products are based upon tests believed to be reliable but do not constitute a guarantee
or warranty.
ZEBRA TECHNOLOGIES CORPORATION SHALL NOT, UNDER ANY CIRCUM-
STANCES WHATSOEVER, BE LIABLE TO THE BUYER OR ANY OTHER PARTY
FOR LOST PROFITS, DIMINUTION OF GOOD WILL, OR ANY OTHER SPECIAL OR
CONSEQUENTIAL DAMAGES WHATSOEVER WITH RESPECT TO ANY CLAIM
HEREUNDER. IN ADDITION, ZEBRA TECHNOLOGIES CORPORATION’S
LIABILITY FOR WARRANTY CLAIMS SHALL NOT, IN ANY EVENT, EXCEED THE
INVOICE PRICE OF THE PRODUCT CLAIMED DEFECTIVE, NOR SHALL ZEBRA
TECHNOLOGIES CORPORATION BE LIABLE FOR DELAYS IN REPLACEMENT OR
REPAIR OF PRODUCTS.
ZebraNet™ PrintServer II Installation and Operation Guide i
Effective June 25, 1999
To Next Page
Loading...
Need help?
General
