Zebra LS2208 Quick Start Up Guide

http://www.zebracom/LS2208
QUICK START GUIDE
LS2208
123 S can
RS-232
RS-232
Scan ONE of the bar codes below
ICL RS-232
NIXDORF RS-232 MODE A
NIXDORF RS-232 MODE B
FUJITSU RS-232
OPOS/JPOS
*STANDARD RS-232
TAB KEY BAR CODE
USB CAPS LOCK OVERRIDE BAR CODE
*USB KEYBOARD (HID)
SNAPI WITHOUT IMAGING
IBM HAND-HELD USB
IBM OPOS (IBM HAND-HELD USB
with FULL SCAN DISABLE)
IBM TABLE TOP USB
1
ABOUT 123Scan
2
3
2
SET DEFAULTS
RETURN TO FACTORY DEFAULTS
2
POST IN WORK AREAPOST IN WORK AREA
STEP 1 - CONNECT HOST INTERFACE
SCANNER FEATURES
See Product Reference Guide
for detailed information
NOTE: Cables may vary depending on configuration
STEP 2 - SET UP INTERFACE (Scan Host Bar Codes)
1 Scan Window
2 LED
3 Scan Trigger
USB
Keyboard Wedge
USB
Scan ONE of the bar codes below
Keyboard Wedge
Scan a bar code below
*IBM PC/AT and IBM PC COMPATIBLE
123Scan
2
is an easy-to-use, PC-based software tool
that enables rapid and easy customized setup of
a scanner via a bar code or USB cable.
For more information,
visit: http://www.zebra.com/123Scan.
IBM 46XX
IBM 46XX
Scan ONE of the bar codes below
The scanner automatically detects the IBM host, but there is no default setting.
Scan one of the bar codes below to select the appropriate port.
NON-IBM SCANNER EMULATION (PORT 5B)
HAND-HELD SCANNER EMULATION (PORT 9B)
TABLE-TOP SCANNER EMULATION (PORT 17)
SET DEFAULTS / ENTER KEY BAR CODES
ADD AN ENTER KEY
To add an Enter key after scanned data, scan
the bar code below.
(Carriage Return/Line Feed)
ADD A TAB KEY
To add a Tab key after scanned data, scan
the bar code below.
PRESENTATION MODE
The scanner automatically detects the USB host and uses the default setting.
If the default (*) does not meet your requirements, scan another host
bar code below.
The scanner automatically detects the RS-232 host and uses the default setting.
If the default (*) does not meet your requirements, scan another host
bar code below.
Scanners using an auto-host detect cable automatically detect the keyboard wedge
host and use the default setting. If the default (*) does not meet your requirements,
scan the IBM AT NOTEBOOK bar code below.
If using a standard keyboard wedge cable, scan the required host bar code below.
USB - OVERRIDE CAPS LOCK KEY (ENABLE)
*USB - DO NOT OVERRIDE CAPS LOCK KEY (DISABLE)
ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED)
ADD A TAB KEY
UTILITY FUNCTIONALITY
- Device configuration
- Electronic programming (USB cable)
- Programming bar code(s)
- Data view – Scan log (display scanned bar code data)
- Access asset tracking information
- Upgrade firmware and view release notes
IBM AT NOTEBOOK

Zebra LS2208 Specifications

General

Brand	Zebra
Model	LS2208
Category	Scanner
Language	English