EasyManuals Logo
Home>Zebra>Handhelds>MC55 Series

Zebra MC55 Series User Manual

Zebra MC55 Series
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MC55X
1
2
6
11
5
8
1
2
3
7
9
10
7
3
4
3
1
2
3
4
3
2
5
1
2
3
4
3
5
7
2
6
8
8
6
10
9
10
9
12
13
14
17
16
18
20
15
19
21
22
Create a Partnership
Install Synchronization Software
Communicate with Host
1 Scan/Action Button
2 Up/Down Button
3 Microphone
4 Power Button
5 I/O Connector
6 Keypad
Note 1: To reset the MC55, press and hold the Power button for five (5) seconds.
FEATURES
COMMUNICATIONBATTERY INSTALLATION
Numeric Keypad
Alpha-Numeric Keypad
CHARGING
Download ActiveSync
®
or Windows Mobile Device Center from
http://www.microsoft.com and follow the instructions to install the
software onto the host computer.
Follow the on-screen instructions to establish a connection between the MC55
and the host computer.
Blue Key
Use this key to access function keys shown on the keypad
in blue.
>
Orange Key
Use this key to access the secondary layer of characters
and actions.
>
>
>
>
>
Press the Blue key once to activate this state
temporarily, followed by another key.
Press the Blue key twice to lock this state.
Press the Blue key a third time to unlock.
Press the Orange key once to activate this state
temporarily, followed by another key.
Press the Orange key twice to lock this state.
Press the Orange key a third time to unlock.
Notifications
Charging/Battery Status LED:
Scan/Decode LED:
Slow blinking amber: Battery charging
Solid amber: Fully charged
Fast blinking amber: Charging error
Red: Scanning active
Green: Good Decode
Scan/Decode
Charging/Battery Status
Insert the Battery
1. Insert the battery, bottom first, into the battery compartment.
2. Press down on the battery until the battery latch snaps into place.
3. Replace the handstrap.
Charge the MC55
Charge the Battery
Slow Blinking Amber = Charging
Charging/Battery Status LED
Solid Amber = Fully charged
Fast Blinking Amber = Charging error
Note: The 3600 mAh battery charges in less than six hours.
Use the Four-slot Battery Charger
to charge batteries separately.
Note: Remove protective shipping film that covers the touch screen, exit window and camera
window before using.
Press the Orange key once to lock the keypad into
Alpha state.
Press the Orange key a second time to return to the
normal state.
Press the Blue key once to activate this state,
followed by another key.
Blue Key
>
Orange Key
Use this key to access the secondary layer of
characters.
>
>
Use the Single-slot cradles (USB or
Ethernet/Modem/USB), Four-slot cradles
(Charge Only or Ethernet) or cables to
charge the battery in the MC55.
You can also charge a spare battery using
the Single-slot cradle.
12 Handstrap
13 Battery
14 Battery Latch
15 Camera Flash (optional)
16 Camera (optional)
17 Exit Window
(see Data Capture Options)
4
(Note 1)
18 Tether
19 Scan/Action Button
20 Action Button
21 Stylus
22 Speaker
7 Scan/Action Button
8 Touch Screen
(with screen protector)
9 Scan/Decode LED
10 Charging/Battery
Status LED
11 Not Used
Quick Start Guide
Use this key to access function keys shown on the
keypad in blue.
3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra MC55 Series and is the answer not in the manual?

Zebra MC55 Series Specifications

General IconGeneral
BrandZebra
ModelMC55 Series
CategoryHandhelds
LanguageEnglish

Related product manuals