Zebra RW SERIES User Manual

46
RW Series User Guide
Cradles
RW 420 Vehicle Cradle
The RW 420 can be used in conjunction with a docking
Cradle. When the printer is “docked” the Cradle will charge
the printer’s battery and allow the printer to print, receive and
transmit data as usual. The Cradle can provide power from
a 12 VDC power supply either from a power take-off point in
a vehicle or from an external power supply running off A.C.
power. Refer to the documentation supplied with the Cradle
for more information.
The RW 420 has software features which can automatical
-
ly rotate the four display lines on the control panel 180º when
the printer is docked. This allows for easier reading of the dis-
play when the Cradle is mounted vertically. Refer to Figure
21.
This feature is also available on the RW 220, but the com-
mand to rotate the display lines must be sent to the RW 220
when it is docked; it will not rotate the display text automati-
cally.
Zebra RW 420
Signal:0%
Battery (ok)
Latch: ok Rdr
MENU
Zebra RW 420
Signal:0%
Battery (ok)
Latch: ok Rdr
MENU
Zebra RW 420
Signal:0%
Battery (ok)
Latch: ok Rdr
MENU
Zebra RW 420
Signal:0%
Battery (ok)
Latch: ok Rdr
MENU
Normal Display
in Cradle
Display rotated in
Cradle
Figure 21: Display Rotated for Cradle Installation

Zebra RW SERIES Specifications

General

Brand	Zebra
Model	RW SERIES
Category	Printer
Language	English