Zebra TC55 User Manual

Installing an Optional microSD Card
1. Slide the microSD card door toward the top of the TC55 to unlock.
2. Lift the SD card door.
3. Align the microSD card with the card holder. Ensure that the contacts on the
card are facing down and toward the card holder. Note the position of the card
notch.
4. Insert the microSD card into the card holder.
5. Close the SD card door.
6. Slide the SD card door toward the bottom of the TC55 to lock into place.
NOTE Supports up to 32 GB cards.
CAUTION For proper electrostatic discharge (ESD) precautions to avoid
damaging the SD card. Proper ESD precautions include, but not
limited to, working on an ESD mat and ensuring that the user is
properly grounded.
Card Notch

Zebra TC55 Specifications

General

Display diagonal	4.3 \
Display resolution	800 x 480 pixels
Display number of colors	-
Internal memory	1 GB
Internal memory type	RAM
Total storage capacity	8 GB
Compatible memory cards	MicroSD (TransFlash), MicroSDHC
Maximum memory card size	32 GB
Processor frequency	1.5 GHz
Headphone outputs	1
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	5 - 85 %
Battery capacity	4410 mAh
Operating system installed	Android 4.4.3
Data network	3G, HSPA+
Wi-Fi standards	802.11a, 802.11g, 802.11b, Wi-Fi 4 (802.11n)
Bluetooth version	4.0
Security algorithms	WPA2, AES, TKIP, MSCHAPv2, PEAP, WEP, WPA, EAP-TLS, EAP-TTLS
Product color	Black, Silver
Barcode reader	No
International Protection (IP) code	IP67
Rear camera resolution (numeric)	8 MP

Weight and Dimensions

Depth	15.9 mm
Width	69 mm
Height	137 mm