30 Pecks Lane, Newtown, CT 06470
Phone: 866-937-4971| Fax: 203-778-1016
www.zephyrlock.com
4. Reset to factory default:
A. If the User Code and Manager Code are forgotten, use the Control Key to open the door.
B. Unscrew the battery cover to get access to the Reset button.
C. Insert a paper clip or other thin tool into the hole marked “RESET” to depress the button. The lock
will issue 2 audible "beeps”, the green and red light will flash twice.
D. The lock has now been reset to the factory default settings of Shared Use mode and Manager Code
“123456”.
5. Program Code:
A. Factory standard programming is for Shared Use.
B. To change programming from Shared to Permanent Use
1. Depress the Reset Button to reset to the factory default.
2. Enter 8 Digit Program Code “12344321”, press Zephyr button for confirmation. The lock issues a
long audible “beep “and the red and green light will flash twice to show program has been
changed successfully.
6. Insufficient battery power alarm:
A. If the battery power is low, the lock will issue an alert with 3 “beeps" when the lock has been
opened.
* Individual user tags can be supplied upon request *
To Previous Page
Loading...
General