Current Parameter
Current Mode
Current Color
Temperature Value
Battery Level
Current Brightness
Value
zhiyun-tech.com
EN
Quick start guide
You don’t have to change the mode if the light stick is in CCT mode
when first powered on or at the last shutdown.
You can adjust hue/saturation/intensity in HSI mode. Single press HSI
Mode Button to enter the mode. Double press power/parameter switch
for quick adjustment of hue/saturation/intensity. Rotate the dial to tune
the hue/saturation/intensity value. Please adjust the hue/saturation/
intensity to a proper value according to actual use.
Current Mode
Current Parameter
Current Hue Value
Current Saturation Value
Current Intensity Value
. FX Light Effect Settings
You can adjust the light effect type and brightness in FX Light Effect
mode. Single press the FX Light Effect mode button to enter the mode.
Select the light effect type setting and rotate the dial to select a type.
Select the brightness setting and double press power/parameter
switch for quick adjustment of brightness. Rotate the dial to tune the
brightness value. Please adjust the brightness/light effect type
according to actual use.
Current Mode
Current Light Effect
Current Brightness
Value
. Hue (H)/Saturation (S)/Intensity (I)
Settings (HSI Mode)
You don’t have to change the mode if the light stick is in HSI mode
at the last shutdown.
You don’t have to change the mode if the light stick is in FX Light
Effect mode at the last shutdown.
2. Brightness/Color Temperature Settings (CCT Mode)
You can adjust brightness/color temperature in CCT mode. Single press
DIM Mode Button to enter CCT mode. Double press power/parameter
switch for quick adjustment of brightness/color temperature. Rotate the
dial to tune the brightness/color temperature value. Please adjust the
brightness/color temperature to a proper value according to actual use.
To Next Page
Loading...
Need help?
General
