EasyManuals Logo
Home>Zip>Water Heater>Aquapoint III AP3/80

Zip Aquapoint III AP3/80 Installation Instructions

Zip Aquapoint III AP3/80
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Contents
Specification 2
Performance 2
Dimensions 3
Parts List 3-4
Installation
Requirements 4-6
Positioning 7-8
Plumbing 8
Electrical 9
Commissioning 9-10
Maintenance
Precautions 10-11
Schedule 11
Fault Finding 12
Draining 13
De-Installation 13
Warranty 14
Installation must only be undertaken by a
competent person holding a current Registered
Operative Identity card for the installation of
unvented domestic hot water storage systems
issued by an accredited body.
The Zip Aquapoint must be installed in
accordance with these instructions and all
current legislation, codes of practice and
regulations governing the installation of
unvented hot water cylinders in force at the
time of installation.
AP3/30, AP3/50, AP3/80, AP3/100 Installation Instructions 2 1 AP3/30, AP3/50, AP3/80, AP3/100 Installation Instructions
Specification
Product: Zip Aquapoint III
Type: Direct unvented
Capacity: 30 litre, 50 litre, 80 litre, 100 litre
Loading: 3.0kW/230v~
Fuse Rating: 15A
Thermostat: Adjustable 25ºC to 75ºC
Thermal cut-out: Manually re-settable set to 84+0/-5ºC
Water vessel: Glass enamelled steel tested to 13 bar. Maximum working
pressure 6 bar
Insulation: High performance foam insulation
Controls: Pressure reducing valve and line strainer set to 3.5 bar
Expansion relief and single check valve set to 6 bar
Pressure and temperature relief valve set to 7 bar and 90ºC
External expansion vessel pre-charged to 3.5 bar
Expansion vessel capacity: 5 litre AP3/30, AP3/50
8 litre AP3/80, AP3/100
Approvals: Zip Aquapoint III complies with LVD and EMC directives and
is CE endorsed. Zip Aquapoint III has been examined,
tested and found, when correctly fitted, to comply with the
requirements of the United Kingdom Water Regulations/
Byelaws (Scotland). The product, therefore, is listed under
the WRAS (Water Regulations Advisory Scheme) Water
Fitting and Materials Directory.
Performance
Size Model Heat up time Re-heat time
(15° to 65ºC) (70% vol.)
30 litre AP3/30 37mins 23mins
50 litre AP3/50 58mins 38mins
80 litre AP3/80 88mins 58mins
100 litre AP3/100 110mins 72mins

Other manuals for Zip Aquapoint III AP3/80

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zip Aquapoint III AP3/80 and is the answer not in the manual?

Zip Aquapoint III AP3/80 Specifications

General IconGeneral
BrandZip
ModelAquapoint III AP3/80
CategoryWater Heater
LanguageEnglish

Related product manuals