Need help?Do you have a question about the zortrax Inventure and is the answer not in the manual?
General| Nozzle width | 0.4 mm |
|---|---|
| Print technology | Layer Plastic Deposition Plus (LPD PLUS) |
| Printing material | ABS, Acrylonitrile Styrene Acrylate (ASA), Nylon, Polyethylene Terephthalate Glycol (PETG), Polylactic acid (PLA) |
| Layer thickness (max) | 0.3 mm |
| Layer thickness (min) | 0.15 mm |
| Number of print heads | 2 |
| Maximum build size (WxDxH) | 135 x 135 x 130 mm |
| Filament thickness supported | 1.75 mm |
| 3D scanner | No |
| Card reader integrated | Yes |
| Compatible memory cards | SD |
| Product color | Black |
| AC input voltage | 110 / 240 V |
| AC input frequency | 50 / 60 Hz |
| Power consumption (max) | 300 W |
| Storage temperature (T-T) | 0 - 35 °C |
| Operating temperature (T-T) | 15 - 30 °C |
To Next Page
