13
To customize your device settings, view important messages about your AT&T service plan, and
check your data usage, use the AT&T Home Base Manager. On any device connected to the AT&T
Home Base, enter http://att.wirelessinternet directly into your browser address field and use
"attadmin" as your login.
To setup a free AT&T email account, go to att.net/signup and select Start Now.
Voicemail
Your AT&T Home Base comes with standard wireless voicemail. Follow the steps below to setup and use
your voicemail.
Setup
Dial 1 on any home phone connected to the AT&T Home Base and wait four (4) seconds to connect to
your AT&T wireless voicemail. Simply follow the voice prompts to complete setup. To enable remote
voicemail retrieval and for added security be sure to create a password during setup.
For more help on setting up your AT&T voicemail, go to att.com/voicemailsetup.
Message Waiting
There are two indicators for a new message waiting: 1) the voicemail icon; and 2) an intermittent dial
tone.
The voicemail icon on your AT&T Home Base blinks when a voicemail message is waiting. You will
also hear an intermittent dial tone on any connected phone handset before placing a call.
Retrieving Messages
To retrieve voice messages, dial 1 on any home phone connected to the AT&T Home Base and wait four
(4) seconds to connect to your AT&T wireless voicemail box. Simply follow the voice prompts to listen to
and manage your messages. (Alternately, you may dial your 10-digit home phone number to access your
voicemail box.)
Remote Retrieval
To retrieve voicemail messages from a phone not connected to the AT&T Home Base, dial the number
associated with your AT&T Home Base service. When voicemail picks up, press *. You will then be
prompted to enter your password. Simply follow the prompts to listen to and manage your voicemail
messages.
To Next Page
Need help?
General
