Why can't I access the internet with my Zte Network Router?
If you cannot access the internet, please check your configuration settings. Also, allow 1 to 2 minutes for the router to initialize. Finally, check your service indicators.
What is the default password for a Zte MF283+ Network Router?
For the Wi-Fi connection password, check the label on the device. The default password for the 4G CPE page is 'admin'. If you have changed the password and forgotten it, you will need to restore the device to its factory default settings.
How to establish a Wi-Fi connection on a Zte MF283+?
To establish a Wi-Fi connection, ensure the Wi-Fi function is active. Refresh the network list and select the correct SSID. Check the IP address to ensure your client obtains an IP address automatically in the Internet protocol (TCP/IP) properties. Type the correct network key (Wi-Fi password) when you connect to the device.
General| Category | Network Router |
|---|---|
| Wi-Fi Standards | 802.11b/g/n |
| Wi-Fi Frequency | 2.4 GHz |
| SIM Card Slot | Yes |
| LTE Category | Category 4 |
| Upload Speed | Up to 50 Mbps |
| Phone Ports | 2 x RJ11 |
| Power Supply | 12V/1.5A |
| Ethernet Ports | 4 |
| Antenna | External |
| Network Bands | LTE FDD: B1/B3/B7/B8/B20 |
| USB Port | 1 x USB 2.0 |
| Download Speed | 150 Mbps |
Connect WAN to LAN via Ethernet, configure clients for automatic IP address acquisition.
Connect WAN to LAN, select WAN mode (PPPoE, Static, DHCP), consult provider for settings.
Set IP address, subnet mask, default gateway, and DNS server manually.
Enable DHCP for automatic IP assignment and network configuration.
Connect PC to LAN port, set WAN Connection Mode to Automatic for wireless access.
Instructions for initiating calls using the handset, including dialling and sending.
Procedures for answering incoming calls via handset or hands-free option.
Solutions for common voice call issues like no dial tone, alerts, or line noise.
Resolves problems with internet access, slow speeds, and connection failures.
Addresses 3G/4G signal indicators and password reset procedures.
Essential safety guidelines for device operation, including interference and environmental factors.
To Previous Page
