Phone CallsPhone Calls
14 15
Muting a Call
During a call, you can mute your microphone so that the person you are speaking
to cannot hear you, but you can still hear them.
Tap Mute to turn your microphone off. To turn your microphone back on,
tap Mute again.
Putting a Call on Hold
During a call, you can put it on hold by tapping Hold.
Tip: If you accept an incoming call while you’re on another call, the first call
automatically goes on hold. Tap Swap to switch between the two callers.
Turning the Speakerphone On/Off
Tap Speaker during a call to turn the speakerphone on. Tap Speaker again to turn
off the speakerphone.
Adding a Call
During a call, tap Add call and dial a number. When you call another number, the
first call automatically goes on hold.
Swapping Calls
To switch between callers, tap Swap.
Merging Calls
To merge two calls and create a conference call, tap Merge calls.
Note: The maximum number of callers on a call varies by carrier.
Ending a Call
Tap
to finish a call.
Adjusting Your Call Settings
You can open the Call Settings menu by tapping Settings.
Fixed Dialing Numbers
Restrict outgoing calls to a fixed set of numbers. To
do this you must know your SIM’s PIN2 code. Not all
carriers support this functionality.
Quick responses Edit quick responses to rejected callers.
Voicemail
Select a voicemail service provider (your carrier
is the default), or edit the voicemail number if
necessary.
TTY mode
Choose a TTY mode after connecting the TTY
device to the phone’s headset port.
A TTY device can allow people who have
hearing or speech disabilities to communicate
by telephone.
Hearing aids
Turn on/off hearing aid compatibility. When you turn
on the hearing aid compatibility and use a hearing
aid with a Telecoil to answer the phone, it will help
you hear more clearly during the phone call.
DTMF tones
Set the length of dual-tone multi-frequency (DTMF)
signal tones: Normal or Long.
To Next Page
Loading...
Need help?
General
