Zte Telstra MF90 User Manual

Page 1 of 38
TELSTRA 4G MY POCKET WI-FI LITE
MF90 - 4G WI-FI HOTSPOT
USER MANUAL
Copyright © 2014 - 2016. All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on errors or
update specifications without prior notice.
Version 1.1 Mar 2016
CHECK YOUR SYSTEM REQUIREMENTS
Your Pre-Paid 4G Wi-Fi will connect to any Wi-Fi enabled device that supports
Wi-Fi 802.11 b/g/n
A web browser is required to log in to your Wi-Fi hotspot if you wish to make any
configuration changes.
USB driverless connection is also supported for Windows (not RT), and MAC
operating systems:
• Windows 8 (not including RT) / 7 / XP / Vista
• MAC OS X 10.5.11 and above
Using the USB connection requires administrator rights to install and run the
software.
We suggest you switch off your anti-virus software before connecting the hotspot
- In some cases protection software can prevent automatic installation.
It is possible to start the installation process manually by clicking the Autorun icon
when it appears.

Zte Telstra MF90 Specifications

Network

LTE frequency	1800 MHz
UMTS frequency	850, 2100 MHz
LTE download speeds	100 Mb/s
LTE upload speeds	50 Mb/s
HSPA+ downlink	42 Mb/s
HSDPA mode	21.6 Mb/s
HSUPA mode	5.76 Mb/s

Battery

battery capacity	2000 mAh
operating time	7 hours
standby time	250 hours

Power

voltage	5 V
resting current	100 mA rms
maximum current	500 mA rms

Operating Environment

operating temperature	-5ºC to +45ºC

Weight and Dimensions

dimensions	100 x 62.8 x 13.5 mm
weight	120 g