Zte WF820+ User Manual

Figure 4-3
4.3 Access Management
4.3.1 Setting the Access Policy
This function enables you to set access restriction policies for each SSID to manage access to
the CPE.
To configure Wi-Fi MAC control settings, perform the following steps:
1. Choose Wi-Fi > Access Management.
2. In the WLAN Access List Settings area, set Access Policy.
The access policy can be set to Disable, Blacklist or Whitelist.
 If SSID's MAC Access is set to Disable, access restrictions do not take effect.
 If SSID's MAC Access is set to Blacklist, only the devices that are not in the blacklist
can connect to the CPE.
 If SSID's MAC Access is set to Whitelist, only the devices in the whitelist can
connect to the CPE.
3. Click Submit. As shown in Figure 4-4.
Figure 4-4

Zte WF820+ Specifications

General

Brand	Zte
Model	WF820+
Category	Network Router
Language	English