Zte ZXR10 ZSR V2 Series User Manual

ZXR10 ZSR V2 Series Router Product Description
12 ZTE Confidential & Proprietary
 Advanced 28nm chip increases performance and reduces energy consumption.
 The hardware adopts the leading submarine-level quiet technology.
 Intelligent fan is automatically adjusted according to system operation status,
reducing power consumption and equipment noise.
 Intelligent off Idle service cards, support EEE energy efficient Ethernet specification,
can reduce energy consumption 2/3.
 Strict adherence to RoHS standards, using unleaded green material, reducing
carbon dioxide emissions.
3 Features
3.1 IPv4 Routing protocols and IP basic service
3.1.1 Unicast routing protocols
ZXR10 ZSR V2 fully supports a variety of unicast routing protocols, including static routing,
RIP, OSPF, IS-IS and BGP.
3.1.1.1 Static Route
Static route is configured manually by an administrator to simplify network configuration
and improve network performance. It uses a scenario of simple network structure. When a
network failure or topology change happens, static route is not automatically changed, but
it is manually changed by an administrator.
ZXR10 ZSR V2 supports static route configuration based on next hop and egress
interface as well as the correlation between static route and VRF instance.
3.1.1.2 RIP
RIP is a UDP-based distance vector dynamic routing protocol. It periodically broadcasts
route tables to neighbors to maintain the relationship between adjacent routers and

Zte ZXR10 ZSR V2 Series Specifications

General

Series	ZXR10 ZSR V2 Series
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Ports	GE, 10GE
Storage Humidity	5% to 95% (non-condensing)