ZUMEX Speed S +plus User Manual

67
EN
On your Display Digital, you will see symbols such as these:
Continuous Mode
Non-continuous Mode Intermediate
Continuous Mode with “Self Cleaning”
Non-continuous mode, high speed with “Self Cleaning”
Auto
Auto
The PulpOut system can always be stopped by pressing the STOP button. In continuous mode
with “Self Cleaning” the STOP button must be pressed twice, once to stop the machine and
the second time to stop the self cleaning.
CALIBRATION: You can calibrate the machine to guarantee that the machine count is correct
at all times.
MACHINE STATUS: You have access to the different anomalies that a machine stoppage
may have caused.
CONTRAST: You can adjust the brightness level on the display.
Remember! Within the CLIENT MENU mode:
“Press OK” to go down a level.
“Press OK at least 2 seconds” to go up a level.
“Press OK at least 2 seconds” to save data (The save symbol will appear).
To exit CLIENT MENU, you must go up the same number of levels you have gone down.
6
7
8
9
1
2
3
BASIC
AUTOMATIC
015.030
PIN
****
OK
PULPOUT. Choose the mode for the
Automatic PulpOut System.
CALIBRATION. To calibrate the machine
for correct count.
STATUS. Access the different anomalies
that a machine stoppage may have
caused.
CONTRAST. To adjust the brightness level
on the display.
LANGUAGE. Select the language
to operate the machine.
PIN. See or change the PIN.
COUNTER. See total or partial
counter of the machine.
MODE. Select the working mode:
automatic or professional.
WASTE LIMIT. Activate a warning to
know when to empty the waste bin.
4
5
2
Pin
OK
Language
1
OK
3
Counter
4
Mode
OKOK
5
Waste Limit
OK
6
PulpOut
OK
7
Calibration
OK
8
Status
OK
9
MENU
Contrast
OK
Menu diagram
Main menu

ZUMEX Speed S +plus Specifications

General

Brand	ZUMEX
Model	Speed S +plus
Category	Juicer
Language	English