NEED HELP? GIVE US A CALL 855.424.9892
20
EFFICIENCY STATEMENTS
NAME OF
SUBSTANCE
USEPA MAX.
CONTAMINANT
LEVEL
INFLUENT CHALLENGE LEVEL
Barium
2.0 mg / L 10 +/- 10% mg / L
Radium 226/228
5 pCi / L 226 / 228: 25 pCi / L
MODEL RATED EFFICIENCY SALT DOSAGE
CAPACITY
AT THAT DOSAGE
AO-WH-SOFT-450T
5,210 grains / lb
(742 grams/kg)
1.25 lbs (0.57 kg)
6,510 grains
(422 grams)
AO-WH-SOFT-PRO-300
5,210 grains / lb
(742 grams/kg)
1 lb (0.45 kg)
5,210 grains
(338 grams)
AO-WH-SOFT-PRO-500
5,210 grains / lb
(742 grams/kg)
1.66 lbs (0.75 kg)
8,650 grains
(561 grams)
MODEL
MINIMUM
CAPACITY/SALT
MIDDLE
CAPACITY/SALT
MAXIMUM
CAPACITY/SALT
AO-WH-SOFT-450T
6,510 grains / 1.25 lbs 35,960 grains / 10 lbs 45,000 grains / 18.75 lbs
AO-WH-SOFT-PRO-300
5,210 grains / 1 lb 20,360 grains / 5 lbs 30,000 grains / 9 lbs
AO-WH-SOFT-PRO-500
8,650 grains / 1.66 lbs 33,410 grains / 8 lbs 50,000 grains / 15 lbs
This product is efciency rated according to NSF/ANSI 44. The stated efciencies are valid
only at the specied salt dosage and 7.0 gpm (26.5 L/min):
An efciency-rated water softener is a demand-initiated regeneration softener that
also complies with specic performance specications intended to minimize the
amount of regenerant brine and water used in its operation.
Efciency-rated water softeners shall have a rated salt efciency of not less than
3,350 grains of total hardness exchange per pound of salt (based on NaCI equivalency)
(477 grams of total hardness exchange per kilogram of salt), and shall not deliver
more salt than its listed rating.
Efciency is measured by a laboratory test described in NSF/ANSI 44. The test represents
the maximum possible efciency that the system can achieve. Operational efciency is
the actual efciency achieved after the system has been installed. It is typically less than
the efciency due to individual application factors including water hardness, water
usage, and other contaminates that reduce the softeners’ capacity.
Reduction Capabilities for Specic Contaminants
Salt and Capacity Range