76 ACS2000 DFE UM 3BHS360367 ZAB E01 REV. K
6.3 Cable requirements
Cables are used for the connection of the power to the input
transformer, from the transformer to the converter and from the
converter to the motor.
For information on the requirements for
power cables, ground cable and equipo-
tential bonding conductor, see:
• ACS2000 power cable specification
• Power cables engineering guideline
For information on the requirements for
the auxiliary power cable and the control
cables, see auxiliary power and control
cables guideline.
To Next Page
Loading...
Need help?
General
