ABB DWA Series User Manual

English
- 11 -
User manual DWA
MANUAL SWITCHING
To manually take action on the channels of DWA time astronomical switches (activated with the combination described on page 6), carry out
the operations described below:
SWITCHING CHANNEL: press the key
C1
for channel 1 or
C2
for channel 2. If on becomes off and vice versa.
temporary on
: the selected channel is set on until the next programmed off event
temporary off
: the selected channel is set off until the next programmed on event
LOCK CHANNEL: press for a long time (for 3 seconds at least) the key
C1
for channel 1 or
C2
for channel 2. The current state is locked
until the unlocking (press again for a long time the key
C1
or
C2
).
permanent on
the selected channel is locked in on position until the manual unlocking
permanent off
the selected channel is locked in off position until the manual unlocking
RANDOM SWITCHING: press contemporary and for a long time (for 3 seconds at least) the key and
C1
for channel 1 or
C2
for channel 2.
Press again simultaneously and for a long time the keys
and
C1
or
C2
to disable the function.
random
: the selected channel is set on and then will take place switching on/off at random intervals (the minimum and maximum
interval can be set from “Settings ➔ random” menu)
CYCLE SWITCHING: press contemporary and for a long time (for 3 seconds at least) the keys and
C1
for channel 1 or
C2
for channel 2
Press again simultaneously and for a long time the key
and
C1
or
C2
to disable the function.
cycle
(flashing) : the selected channel is set on and then will take place switching on/off (the on and off duration can be set from
“Settings ➔ cycle” menu).

ABB DWA Series Specifications

General

Brand	ABB
Model	DWA Series
Category	Timer
Language	English