503 623-102
Installation and set-up
503 623-102 15
4 Installation and set-up
4.1 Lifting instructions
The control cabinet is fitted with lifting eyes to allow easy lifting.
Qualified personnel may only lift the control cabinet using equipment that
corresponds with applicable lifting standards.
4.2 Mechanical installation
The base of the control cabinet has fastening holes for secure mounting to the floor.
The surface should be flat and solid corresponding to a concrete, workshop floor.
Holes for expansion bolts or the like should correspond with the hole pattern
illustrated below.
lifting instructions
min 60 degrees
To Next Page
Loading...
Need help?
General
