Absen A27 V3 Series User Manual

A27 V3 Series Product User Manual
19
Step 4: Connect the signal cable and power cable Step after installing the
panel.
Step 5: Install the module, paying attention to the corresponding numbering of
the module and the panel.
4.3 Hanging installation
Use screws on the top and bottom of the panel to connect the hanging bar. The
hanging bar can lift up to 20 panels, and internal connecting plates need to be
installed. Single and double hanging bars are optional.

Absen A27 V3 Series Specifications

General

Brand	Absen
Model	A27 V3 Series
Category	Digital Signage
Language	English