6
c - Remove the wire filter holder and replace the grease filter
d - Replace the ducting grille panel.
CAUTION: always comply with the cleaning and maintenance times given above, to prevent any
risk of fire due to filters that are saturated with grease.
2.3 - Activated charcoal filter
1 - Function
The activated charcoal filters absorb smells and odours until they reach saturation point. They
cannot be washed or regenerated, and must be replaced at least every 4 months, or more
frequently in case of particularly heavy use.
2 - Replacement:
a - Open the ducting grille panel or remove the grease filter
b - Replace the activated charcoal filters by turning the thumb screws in an anticlockwise
direction to remove, and in a clockwise direction to replace.
c - Close the ducting grille again, or replace the grease filter
2.4 - Worktop illumination
a - This is provided by two 40 W lamps, which can be accessed by removing the transparent cover
b - If the lamps are not working, check that they are screwed in properly.
c - If the lamps have fused they must be replaced using others of the same voltage and power.
2.5 - Cleaning
The hood must be cleaned internally and externally using a damp cloth and mild liquid detergent.
Under no circumstances use abrasive substances.
To Next Page
Loading...
Need help?
General