2 Customizing my computer44
English
Installing memory
Follow these steps to install memory:
1 Turn off the computer, unplug the AC adapter (if connected) and
remove the battery pack. Then turn the computer over to access its
base.
2 Remove the screw from the memory cover, then lift up and
remove the memory cover.
3 Insert the memory module diagonally into the slot (a), then gently
press it down until it clicks into place (b).
4 Replace the memory cover and secure it with the screw.
The computer automatically detects and reconfigures the total
memory size.
To Next Page
Loading...
Need help?
General
