- 43 -
Chapter 2
Operating Instructions
CONTROLS
Control panel (monitor front panel)
1. Power ON/OFF switch, push to ON and push to OFF. (Toggle switch)
2. Power LED will be blue when monitor is on; be amber when in power saving mode.
3. Menu.
4. Adjust increase (Function select).
Adjust decrease (Function select).
5. Auto adjustment Buttons.
Note:
1. Press button 4 (plus +) or (minus -) at the same time can activate “Volume Adjustment”.
2. When OSD Menu is off, press button 5 (auto) at the same time can activate “Auto Adjustment” immediately.
3. When into Factory mode press 4 (plus +),(minus -) and 1 (power) together 2 seconds at same time.
5. When into Burning mode press 5 (menus), 1 (power) together 2 second at same time.
To Next Page
Need help?
General
