Acer G205HV User Manual

EN-6
ATTACHING / REMOVING THE BASE
SCREEN POSITION ADJUSTMENT
In order to optimize the best viewing position, you can adjust the tilt of the
monitor by using both of your hands to hold the edges of the monitor as
shown in the figure below.
The monitor can be adjusted to 15 degrees up or 5 degrees down as indicated
by arrow below.
Note: Remove the monitor and monitor base from its packaging.
Carefully place the monitor face-down on a stable surface -- use a
cloth to avoid scratching the screen.
Install:
Align the base with the stand and
push the base towards the top of the
monitor.
Remove:
Depress the release hooks as indicated
first before removing the base and
follow the arrow direction to remove
it.

Acer G205HV Specifications

General

Screen Size	20 inches
Resolution	1600 x 900
Panel Type	TN
Brightness	250 cd/m²
Contrast Ratio	1000:1
Response Time	5 ms
Refresh Rate	60 Hz
Ports	VGA
Aspect Ratio	16:9
Connectivity	VGA
Input Connectors	VGA
Viewing Angle	170° horizontal, 160° vertical

Summary

Special Notes on LCD Monitors

Information for Your Safety and Comfort

Safety Instructions

Read and follow all warnings and instructions carefully for product use and safety.

Accessibility Caution

Ensure the power outlet is easily accessible for safe and quick disconnection of the equipment.

General Warnings

Key warnings regarding water, unstable surfaces, ventilation, and electrical shock hazards.

Safe Listening Practices

Guidelines for protecting hearing, including gradual volume increase and taking breaks.

Product Servicing Guidelines

LCD Pixel Statement

Comfortable Use Tips

Finding Your Comfort Zone

Adjust monitor viewing angle, posture, and desk setup for optimal comfort during use.

Vision Care Recommendations

Eye Strain Reduction

Rest eyes frequently, blink often, and focus on distant points to reduce eyestrain.

Display Optimization

Keep display clean, adjust position, brightness, contrast, and minimize glare for better viewing.

Developing Good Work Habits

Unpacking Your Monitor

Base Attachment and Removal

Screen Position Adjustment

Connecting the Power Cord

General Safety Precautions

Monitor Cleaning Procedure

Power Saving Mode Details

DDC Protocol Information

Connector Pin Assignments (15-Pin)

24-Pin Display Signal Cable

Standard Timing Table

Monitor Installation Steps

Connect Video Cable

Connect VGA or DVI cable to monitor and computer while powered off.

Connect Audio Cable (Optional)

Connect the audio cable if the monitor has an audio input model.

Connect Power Cord

Connect the power cord to the monitor and then to an AC outlet.

Power On Sequence

Power on the monitor first, then the computer. This sequence is important.

User Controls and Operations

Power Switch and LED Indicator

Turns the monitor on/off. LED indicates power status.

Shortcut Menu Functions

Access common settings quickly via function buttons like e, AUTO, MENU, Volume, Input.

Acer eColor Management System

eColor Management Operation

Steps to open OSD, select modes using arrow keys, and confirm with AUTO.

eColor Mode Features

Details of User, Text, Standard, Graphic, and Movie modes and their benefits.

Adjusting OSD Settings

Picture Quality Adjustments

Use MENU to open OSD, navigate to Picture, adjust Brightness, Contrast, Colour Temp, etc.

Adjusting OSD Position

Adjusting System Settings

Product Information Display

Troubleshooting Guide (VGA)

VGA Mode Issues

Troubleshooting steps for No Picture, Abnormal Picture, and Abnormal Sound in VGA mode.

Troubleshooting Guide (DVI)

DVI Mode Issues

Troubleshooting steps for No Picture and Abnormal Sound in DVI mode.

Declaration of Conformity (CE)

FCC Declaration of Conformity