Acer G246HL User Manual

EN-10
USER CONTROLS
Base Controls
Power Switch / Power LED:
To turn the monitor ON or OFF.
Lights up to indicate the power is turned ON.
 /  Minus / Plus:
If the OSD is active, press the Minus or Plus buttons to toggle between the OSD
options.
MENU OSD functions
Press this botton to activate the OSD menu.
AUTO Auto Adjust:
Press this button to activate the Auto Adjustment function. The Auto Adjustment
function is used to set the HPos, VPos, Clock and Focus.
Empowering:
Press the Empowering Key to open the Acer eColor Management OSD and access the
scenario modes.

Acer G246HL Specifications

General

Screen Size	24 inches
Resolution	1920 x 1080
Panel Type	TN
Aspect Ratio	16:9
Refresh Rate	60 Hz
Response Time	5 ms
Brightness	250 cd/m²
Contrast Ratio	1000:1
VESA Mount Compatibility	100 x 100 mm
Ports	DVI, VGA
Viewing Angle	170° (horizontal), 160° (vertical)