Acer K130 User Manual

14
English
Wireless Projection via acer USB
WiFi Adapter
Plug in acer USB WiFi adapter in USB type A slot of projector. Change projector
source upto USB A, and screen of projector will as below.
Enable your WLAN of Notebook and select the access point labeled
AcerProjector or AcerProjector XXXX to connect wirelessly. The Server IP
indicates the IP address (192.168.100.10) your projector uses to connect to a
wireless network.
Open the Internet browser and type by 192.168.100.10 or installation CD to
download Acer eProjection Management from the welcome page, and then
click Run to launch the Welcome to the Acer Projector Gateway Setup Wizard.
USB
HDMI AV IN DC IN
micro

Acer K130 Specifications

General

Matrix size	0.45 \
Number of colors	1.073 billion colors
Native aspect ratio	16:10
Projection distance	0.64 - 3.4 m
Vertical scan range	50 - 85 Hz
Horizontal scan range	31 - 69 kHz
Projection technology	DLP
Supported aspect ratios	4:3, 16:9
Contrast ratio (typical)	10000:1
Screen size compatibility	- \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-40/+40 °
Vertical synchronization (max)	0.120 kHz
Horizontal synchronization (max)	100 kHz
Focal length range	- mm
Light source type	LED
Service life of light source	20000 h
Full HD	No
Analog signal format system	NTSC, PAL, SECAM
Supported graphics resolutions	1920 x 1080 (HD 1080)
RMS rated power	1 W
Number of built-in speakers	1
USB connector type	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Compatible memory cards	SD
Noise level	31 dB
Product type	Standard throw projector
Product color	White
Market positioning	Portable
Power source	AC
AC input voltage	110 - 220 V
Power consumption (typical)	81 W

Weight and Dimensions

Depth	116 mm
Width	140 mm
Height	41 mm
Weight	1240 g