7
Chapter 3 Technical Information
Specifications
LCD Panel HYDIS AU
Size 17.0" (43 cm) 17.0" (43 cm)
Display Type Active matrix color TFT LCD Active matrix color TFT LCD
Resolution 1280 x 1024 1280 x 1024
Display Dot 1280 x (RGB) x 1024 1280 x (RGB) x 1024
Display Area (mm) 337.92 x 270.34 (HxV) 337.92 x 270.34 (HxV)
Display Color 16.7M 16.7M
Brightness 250 cd/m
2
(typical) 250 cd/m
2
(typical)
Contrast Ratio 400: 1 (typical) 400: 1 (typical)
Response Time 25ms (typical) (25+15) ms (typical)
Lamp Voltage 800 Vrms (typical) 720 Vrms (typical)
Lamp Current 6.0 mA rms. (typical) 6.0 mA rms. (typical)
Viewing Angle Vertical: -60° ~ +70° Vertical: -70° ~ +70°
Horizontal: -75° ~ +75° Horizontal: -75° ~ +75°
Video
Input Signal
Input Impedance
Polarity
Amplitude
Multi-mode Supported
Analog RGB 0.7Vp-p
75 Ohm ± 2%
Positive
0 - 0.7 ± 0.05 Vp
Horizontal Frequency: 24 ~ 80 KHz
Vertical Frequency: 56 ~ 75 Hz
Control Power On/Off switch with LED indicator
OSD
Brightness
Contrast
Horizontal Position
Vertical Position
Phase
Clock
Display Mode Setup
Digital
Digital
Digital
Digital
Digital
Digital
Use EEPROM to save settings in memory
Power Management
Mode
Power
Consumption*
AC Input LED Color
On 54W maximum 240 VAC Green
Standby** 5W maximum 240 VAC Yellow
Suspend** 5W maximum 240 VAC Yellow
Off** 5W maximum 240 VAC Yellow
DC Power Off 5W maximum 240 VAC Dark
Disconnected 5W maximum 240 VAC
Yellow: Standby, Suspend, Off
Dark: DC Power off
* Meeting VESA DPMS requirements measured from AC Input end of AC adapter.
** The status of standby, suspend and off don't include the power consumption of the audio components.
Sync Input
Signal Separate TTL compatible horizontal and vertical synchronization
Polarity Positive and negative
Plug & Play Supports VESA DDC1 and DDC2B functions