Acer P166HQL User Manual

EN-11
INSTALLATION
To install the monitor to your host system, please follow the steps as given
below:
Steps
1. Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
2. Connect power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
3. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
4. If the monitor still does not function properly, please refer to the
troubleshooting section to diagnose the problem.

Acer P166HQL Specifications

General

Screen Size	15.6 inches
Resolution	1366 x 768
Panel Type	TN
Aspect Ratio	16:9
Brightness	200 cd/m²
Response Time	5 ms
Ports	VGA
Viewing Angle	90° (H) / 65° (V)