EasyManuals Logo
Home>Acer>Monitor>S242HL

Acer S242HL User Manual

Acer S242HL
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
iii
Information for your safety and
comfort
Safety instructions
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Due to the nature of the fluorescent light, the screen may flicker during
initial use. Turn off the power switch and then turn it on again to make
sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
blemishes of 0.01% or less such as a missing pixel or a pixel lit all the time.
may remain after switching the image, when the same image is displayed
for hours. In this case, the screen is recovered slowly by changing the image
or turning off the power switch for a few hours.
Cleaning your monitor
Please carefully follow these guidelines when cleaning the monitor:
Always unplug the monitor before cleaning.
Use a soft cloth to wipe the screen and cabinet front and sides.
Special notes on LCD monitors
The LCD screen has 99.99% or more effective pixels. It may include
Due to the nature of the LCD screen, an afterimage of the previous screen
The following are normal with the LCD monitor and do not indicate a problem.

Other manuals for Acer S242HL

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Acer S242HL and is the answer not in the manual?

Acer S242HL Specifications

General IconGeneral
3DNo
Aspect ratio16:9
Response time2 ms
Display surface-
Display diagonal24 \
Viewing angle, vertical160 °
Contrast ratio (dynamic)100000000:1
Display number of colors16.78 million colors
Viewing angle, horizontal170 °
Display brightness (typical)250 cd/m²
Supported graphics resolutions1920 x 1080 (HD 1080)
HDCPYes
USB Type-A downstream ports quantity0
CertificationMPR II
Product colorBlack
Panel mounting interface- mm
AC input voltage110 - 220 V
Power consumption (off)0.52 W
Power consumption (standby)0.69 W
Power consumption (typical)26.1 W
Sustainability certificatesENERGY STAR
Cables includedAC, DVI, HDMI, VGA
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)165.1 mm
Width (without stand)563.9 mm
Height (without stand)401.3 mm
Weight (without stand)3100 g

Related product manuals