104
Chapter 3: Replacing notebook components
3 If the notebook has wireless networking built in, unplug the wireless antennas by
following the steps in “Replacing the IEEE 802.11 wireless card” on page 67.
4 Remove the hard drive(s) by following the steps in “Replacing the primary hard
drive” on page 64 and “Replacing the secondary hard drive” on page 73.
5 Remove the keyboard cover by following the steps in “Replacing the keyboard
cover” on page 78.
6 Remove the keyboard by following the steps in “Replacing the keyboard” on page
80.
7 Remove the LCD assembly by following the steps in “Replacing the LCD assembly”
on page 84.
8 Remove the palm rest by following the instructions in “Replacing the palm rest” on
page 96.
9 Remove the screws securing the right speaker to the palm rest.
10 Remove the screws securing the left speaker to the palm rest.
11 Carefully lift the microphone out of its holder and put the new microphone in its
place.
Screw
Screw
Screw
Screw
Screw
To Next Page
Loading...
Need help?
General
Weight and Dimensions
