User controls
Front panel controls
1 Power LED: Lights up to indicate the power is turned on.
2 Power switch: Turns the power on or off.
3.4 < / > : Press < or > to navigate to the desired function, press Enter to select
the function. Press < or > to change the settings of the current
function.
5 Menu/Enter: Activate the OSD menu when the OSD is off or activate/
deactivate the adjustment function when the OSD is on.
6 Auto adjust button/Exit:
a When the OSD menu is active, this button will act as the exit key
(OSD menu).
b When the OSD menu is inactive, press this button for two seconds to
activate the Auto Adjustment function. The Auto Adjustment
function is used to set the HPos, VPos, Clock and Focus.
7 Empowering Key/Exit:
a When the OSD menu is active, this button will act as the exit key
(exit OSD menu).
b When the OSD menu is inactive, press this button to select scenario
mode.
To Next Page
Loading...
Need help?
General
