Acer VG272 User Manual

English
Display Data Channel (DDC)
To make installation easier, so long as your system supports the DDC protocol, the monitor
is able to plug-and-play. The DDC is a communication protocol through which the monitor
automatically informs the host system about its capabilities; for example, supported
resolutions and corresponding timing. The monitor supports the DDC2B standard.
19-pin color display signal cable*
PIN No. Description PIN No. Description
1 TMDS Data2+ 2 TMDS Data2 Shield
3 TMDS Data2- 4 TMDS Data1+
5 TMDS Data1 Shield 6 TMDS Data1-
7 TMDS Data0+ 8 TMDS Data0 Shield
9 TMDS Data0- 10 TMDS Clock+
11 TMDS Clock Shield 12 TMDS Clock-
13 CEC 14 Reserved (N.C. on device)
15 SCL 16 SDA
17 DDC/CEC Ground 18 +5V Power
19 Hot Plug Detect
20-pin color display signal cable
PIN No. Description PIN No. Description
1 ML_Lane 0+ 2 GND
3 ML_Lane 0- 4 ML_Lane 1+
5 GND 6 ML_Lane 1-
7 ML_Lane 2+ 8 GND
9 ML_Lane 2- 10 ML_Lane 3+
11 GND 12 ML_Lane 3-
13 KONFIG1 14 CONFIG2

Acer VG272 Specifications

General

Screen Size	27 inches
Resolution	1920 x 1080 (Full HD)
Panel Type	IPS
Response Time	1ms (VRB)
Adaptive Sync	AMD FreeSync
Contrast Ratio	1000:1
Viewing Angle	178° (H) / 178° (V)
Color Gamut	72% NTSC
VESA Mount	100 x 100 mm
Tilt	-5° to 20°
Refresh Rate	165Hz
Brightness	250 nits
Ports	1 x DisplayPort 1.2
Weight	4.85 kg