Acer VG272U User Manual

English
Installation
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the DP(optional) and /or HDMI (optional) input socket of the monitor, and the
DP(optional) and /or HDMI (optional) output socket of the graphics card on the computer.
3. Insert the monitor power cable into the power port at the back of the monitor.
4. Plug the power cords of your computer and your monitor into a nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user manual for more instruction.

Acer VG272U Specifications

General

Screen Size	27 inches
Panel Type	IPS
Response Time	1ms (VRB)
Contrast Ratio	1000:1
Aspect Ratio	16:9
Adaptive Sync	AMD FreeSync
HDR	HDR10
VESA Mount	100 x 100 mm
Resolution	2560 x 1440
Refresh Rate	144Hz
Brightness	350 cd/m²
Ports	1x DisplayPort, 2x HDMI