Advent 300 User Manual

Phasing
When
connecting
a
pair of speakers it
is important
that both speakers
be
connected in
the same way. For example, if your speaker ter
minals are labelled 0 and 8,
and one speaker’s
0
terminal is connected to one receiver channel’s
black
terminal, the other speaker should be
connected identically
to the other channel. All
speaker cords are coded in some way, such as
by ribs running down the
insulation of one of the
cord’s two wires, to help make the connections
identical for each channel.
Connecting the speakers
identically assures
that all the speaker cones move back and forth
together, “in phase”. If you are not sure that the
connections are correct for proper
phasing,
a
simple listening
test willl verify them. Place the
speakers
face to face a few
inches
apart, and
listen to a
musical
selection with the
Model
300
in the
Mono mode. Then
reverse the
con
nections
on one speaker and
listen again.
Whichever
connection yields
the fuller and
lou
der
sound is the
correct one.

Advent 300 Specifications

General

Brand	Advent
Model	300
Category	Stereo Receiver
Language	English