A The digital indicator can show:
• Programme duration (e. g. ).
• Delay time (e. g. or ).
• Cycle end (
).
• Warning code ( ).
B Extra rinse indicator. It lights on when this option is se‐
lected .
C
The indicator blink during the laundry load detec‐
tions.
D Child safety lock indicator.
E Door locked indicator.
8. DIAL AND BUTTONS
8.1 Programme dial
For selecting the desired washing
programme. Refer to 'Programmes'
chapter for more details.
The position
is a "Reset" function,
which stops and resets the running
programme. When the selector is in this
position, display shows . It indicates
that no programme was selected.
8.2 On/Off
Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease
the energy consumption in a few cases,
you may need to activate the appliance
again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
8.3 Introduction
The options/functions are
not selectable with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set the incompatible
options/functions together.
Make sure the screen and
touch buttons are always
clean and dry.
8.4 Temp.
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Set this option to change the default
temperature.
The indicator = cold water of the set
temperature comes on (the appliance
does not heat the water).
ENGLISH 13
To Next Page
Loading...
Need help?
General
