Need help?Do you have a question about the AERMEC EXTK PRO and is the answer not in the manual?
General| Brand | AERMEC |
|---|---|
| Model | EXTK PRO |
| Category | Controller |
| Language | English |
Describes the intended and appropriate use of the SPL unit for safety reasons and proper operation.
Prohibits any use outside the expressly permitted scope, highlighting potential risks and failures.
Outlines AERMEC SpA's disclaimer of liability for damages arising from improper installation or use.
Details the mandatory disposal and recycling requirements for electrical and electronic equipment under the WEEE Directive.
Details settings related to system timing, including ignition and shutdown delays.
Covers antifreeze settings, including setpoints, hysteresis, and bypass options.
Defines configuration parameters like minimum and maximum setpoints, comfort, and economy settings.
Manages alarm settings, including bios alarms, user alarms, and error handling for probes.
Allows setting and modifying the device's date and time parameters.
Configuration options for the system, including mode, probes, and fan settings.
Settings related to ambient and external temperatures, including limits and offsets.
Configuration for additional sensors like humidity and ambient temperature probes.
Defines setpoints for comfort and economy modes, including pool and ambient temperatures.
Manages time slots for automatic operation, including timer type and settings.
Settings for compressor operation, including minimum/maximum times and swap configurations.
Details the keyboard components, including the LCD display and the function of Green, Yellow, and Red indicator LEDs.
Explains how to use function keys (F1-F4) and menu navigation keys for controlling the unit and accessing its features.
Describes how to turn the unit on and off using the central button or remote controls.
Explains how the unit behaves after a power failure, including its restart and shut down procedures.
Details the priority and conditions for using remote controls versus the ON/OFF key and time slots.
Explains the 'Comfort' and 'Economy' modes for setting water temperature based on usage needs.
Details parameters for internal air temperature, including offset and humidity settings.
Provides information on the 'Post Vent.' parameter, related to water temperature delivery.
Step-by-step guide on how to modify temperature set-points for Comfort and Economy modes using the interface.
Explains how to access and manage time slots for automatic unit operation via the main menu.
Details the available timer types: 7/7, Weekly, and 5+2, for scheduling unit operations.
Step-by-step guide for setting time, minutes, and mode for individual slots using the 7/7 timer type.
Describes how the WEEK timer type manages the week uniformly, using settings defined in the 7/7 paragraph.
Explains the 5+2 timer type, managing the week in work (Mon-Fri) and festive (Sat-Sun) sections.
Covers how alarms and probe errors are managed during operation, shutdown, and reset.
Describes how the red LED and menu indicate the presence and status of alarms.
Explains the function of the cumulative alarm relay for signaling active alarms.
Details high and low temperature alarms, including their generation and reset conditions.
Explains how persistent alarm/anomaly conditions are indicated and how to reset them.
Provides steps to check for Bios, User, and Probe errors, and how to perform alarm resets.
Lists status codes and descriptions for BIOS-related alarms, including communication and clock errors.
Categorizes user alarms by name, indicating if they trigger an alarm relay or anomaly.
Lists probe error alarms, including temperature, humidity, pressure, and air quality probes.
Provides troubleshooting steps and reset types for specific BIOS errors.
Details troubleshooting and reset procedures for user alarms and probe errors.
To Next Page
