56 Agilent N518xA, E8663B, E44x8C, and E82x7D Signal Generators Programming Guide
Using IO Interfaces
Using USB (Agilent MXG)
Verifying USB Functionality
Mini-B 5 Pin Rear Panel Connector
NOTE For information on verifying your Mini- B 5 pin USB (rear panel) functionality, refer to the
Agilent Connection Expert in the Agilent IO Libraries Help. The Agilent IO libraries are
included with your signal generator or Agilent GPIB interface board, or they can be
downloaded from the Agilent website: http://www.agilent.com.
Type-A Front Panel USB Connector
For details on using the front panel USB (Type- A) and the front panel USB Media operation, refer to
the User’s Guide.
To Next Page
Loading...
Need help?
General
