HP
83712A/12B
Specifications
Specifications describe the instrument’s warranted performance over the
0”
to
55O
temperature
range unless otherwise noted. Supplemental characteristics, indicated
by
italics,
are intended
to provide information useful in estimating instrument capability in your application by
describing typical, but not warranted, performance.
Frequency
Eange:
0.01 to 20.0
GHz
Resolution: 1
kHz
(1 Hz with Option
lE8)
Stability (with high stability timebase, Option lE5):
Aging Rate:
<1.5x
10eg/day
after 24-hour warm up.
li?mperature
l$@cts:
<l
x10+
over
0
to
SSOC,
nominally
<l.4x10-gPC
Line
Voltage
&fects:
<5x1Q-l”
for 10%
change
in line
voltuge
Stability (without high stability timebase):
Aging
litzte:
<1.0x10-“/day
aJIer
72-hours
at
25”CflO”C
llmperature
lilWt.s
<5x
10
-60wOto550Crej&r~dto250C
Stability (with external 10
MHZ
reference):
Same as external reference.
Freqwnq
Switching
Time:
~50
ms to within 1
kHz
Jbr
~1
GhT.z
steps, not across 10
Gh?Iz
band switch point:
~35
ms (HP 83712B
on@)
RF output
Maximum Leveled Output Power (6% to + 35°C):
I I
I
I
I
4 8 12 16
20
Carrier Frequency (G Hz)
Figure 1-6.
Typical Maximum Available Output Power from 1 to 20
GEz,
at 25°C with Output Step
Attenuator (Option 1El) Installed
HP 837
12Aj12B
Specifications
l-7
To Next Page
Loading...
Need help?
General
