10
Meter Connection Configuration
The U1600B Series offers high precision, rugged auto ranging in true RMS
with analog bar graph display. Enter Meter mode to select Volt Meter,
Ohm Meter or Auxiliary Meter. Refer to Figure 4 for meter measurement
connection.
Auto ranging is set as the default mode
for all voltage and resistance measure-
ments. To vary measurement range manu-
ally, press Autoscale button to enable
manual ranging and select the preference
range by pressing the same button. To
enable the auto range function, press and
hold the same button until beeper emitted.
Figure 4 Connection for meter measurement
Meter Menu Sub Menu Relative Min, Max, Average Restart Test
Volt Meter DC √√√
AC+DC √√√
AC √√√
Ohm Meter Resistance √√√
Diode Test
Continuity √√
Capacitance √
Aux Meter Temperature Meter (
o
C/
o
F) √√√
Ampere Meter (AC/DC) √√√
Humidity Meter (%RH) √√√
Pressure Meter (psi/kPa) √√√
Table 3
Measurement functions of each meter
NOTE
To Next Page
Loading...
Need help?
General
